How to choose a high-quality buckle scaffold?
1. Check the materials of the scaffolding
When choosing a bracket type scaffold, it is necessary to first understand the material of the scaffold to be purchased and see if the material is a standard primary steel pipe. Small workshops that are not bad use a mixture of primary and secondary steel pipes to lower market prices. There are many safety hazards associated with the use of secondary steel pipes, as the pipes may crack during construction. So materials are very important.
2. Check the water absorption rate of the scaffold
The lower the water absorption rate of the buckle type scaffold, the better. The detection method is also very simple. Just measure the weight of the dry socket type buckle scaffold first, then put the socket type buckle scaffold in water for a period of time, take it out, weigh it, and compare the weight difference between the two. The weight difference is the weight of the water. If the water absorption rate exceeds the national standard of 12.0%, the scaffold will definitely not meet the standard, which is a quality issue.
Buckle type scaffolding
3. Look at the glaze
Cracking is a common phenomenon in the glaze of buckle type scaffolding. The socket type buckle scaffolding with cracked glaze will lose its original luster and waterproof performance when the glaze falls off after freezing in winter. The inspection in this regard only needs to check whether there are cracks on the surface of the socket type buckle scaffold that are as fine as spider silk.
4. Check the degree of sintering
The higher the sintering degree of the buckle type scaffold, the stronger the scaffold will be. The method used is to knock, the clearer the sound, the better the quality.
The above is the method for considering buckle scaffolding.
